Router Bits & Collets
Specifically designed to work with your Origin to give you the best cutting experience.
Specialty Router Bits
High performance roughing bit for removing large amounts of material while still cutting deep passes
$134.00 CAD
15 mm cutting length provides extra reach with a small diameter bit
$103.00 CAD
Clean and reliable option to use to create finger pulls and in your work in a single pass.
$116.00 CAD
Useful for decorative edging and juice grooves on signage, cutting boards, and more
$61.00 CAD
This clearing bit will change the way you work with Origin. Its 16 mm diameter will make quick, clean work of all your pocketing operations, and make Origin a much more efficient tool for a wide range of projects. The three-flute geometry reduces load on the spindle, decreases heat build-up, and keeps your cutter edges sharp and clean through hours of cutting.
$199.00 CAD
Special Dovetail Router Bit designed to route slots for the Keilverbinder connection system
$88.00 CAD
This T-slot bit adeptly handles a wide range of undercut operations. From insetting cables to cutting perimeter T-slots and keyhole mounting, this brazed carbide bit stays sharp and durable, reducing runout and ensuring quality cuts throughout its lifetime.
$51.00 CAD
This 15° dovetail bit can be your go-to bit for all your dovetail joinery. Dual-edged brazed carbide blades cut consistently and accurately in even the hardest woods. Its 15° incline is designed for European designs (the American dovetail is typically 14°), giving you greater freedom to take on a wider variety of projects.
$57.00 CAD
The 90° Engraving Bit adds versatility to your engraving projects when combined with the stock 60° engraving bit that ships with Origin. In addition to engraving in a wide variety of materials including hardwoods, acrylics, and non-ferrous metals, you can use the V90 bit to chamfer edges for perfect 90° miters
$33.00 CAD
The ⅛” polished O-flute bit is a great go-to bit for making shallow cuts in a wide variety of acrylics and non-ferrous metals. The polished flute prevents nasty chip build-up that can compromise cut quality and decrease cutter longevity, and the shorter profile contributes to overall durability. Great for cuts up to ¼” in depth.
$43.00 CAD
An ideal bit for many types of acrylic cutting. The polished flute prevents nasty chip build-up that can compromise cut quality and decrease cutter longevity. Appropriate cutter geometry for both acrylics and non-ferrous metals. Great for cuts up to 1/2” in depth.
$51.00 CAD
Take advantage of more of Origin’s Z-axis travel range with this 35 mm cutter length. Three flutes provide cutting advantages in a wide range of materials, from foam to hardwood. Increased pass depth will make your Origin projects more efficient without compromising on cut quality or stability. The shaft is marked for exact collet clamping to save time during bit changes.
$125.00 CAD
Longer cutting length for deeper passes and improved stability in deep cuts.
$36.00 CAD
Perfect for deep profile contouring or cutting wedged tenons for custom joinery.
$79.00 CAD
Ideal for cutting board juice channels to dimensional signage and text.
$40.00 CAD
Gives you the freedom to make deep cuts in acrylics with accuracy and durability.
$65.00 CAD
Make single passes up to ¾” in even dense hardwood with confidence! 8mm collet required.
$72.00 CAD
Features a 30 mm cutting length plus a clamping neck to use Origin’s full Z-axis travel
$116.00 CAD
Origin’s workhorse cutter, ideal for a wide variety of projects and materials
$36.00 CAD
A 8 mm shank and 60° geometry cutter, use it for engraving operations and shallow v-cuts
$36.00 CAD
Collets
A must-have for any project that needs small shank cutters, like inlays or fretwork
$70.00 CAD
The collet that ships with Origin in the United States and Canada
$70.00 CAD
Essential Router Bits
Keep your go-to bits close at hand with the Essential Bit Kit, a convenient way to store and transport the three stock cutters that are included with Origin. The custom foam insert protects your cutters from incidental damage and the Shaper Micro-Systainer makes it easy to always know what to reach for during bit change operations.
$119.00 CAD
Origin’s workhorse cutter, ideal for a wide variety of projects and materials
$33.00 CAD
With a ¼” shank and 60° geometry, use this cutter for engraving operations and shallow v-cuts