Shaper Workstation
Align and clamp your work with speed and precision using Shaper Workstation — the ultimate fixturing solution for Origin. The front face is fitted with a t-track for easy clamping, end stops, and an angled fence, while the included shelf makes cutting small parts easy and repeatable.
Product ships within 3-7 business days
Shipping cost and VAT, if applicable, are calculated in the checkout. Delivery time and cost vary base on your location.
PRODUCT OVERVIEW
Workstation is designed to streamline your workflow and expand Origin’s abilities by offering rapid, repeatable, and precise fixturing of a wide range of stock configurations. Workstation features a reusable ShaperTape field, an easily adjustable shelf for small or difficult-to-fixture workpieces, indexing pins for easy alignment and registration, and an angled fence for aligning stock from 0-45 degrees. These features greatly reduce setup time and make it easier than ever to get cutting quickly.
Built-in ShaperTape: Origin will automatically recall all designs associated with your Workstation
T-Track Clamping Face: Use the included clamps, or your own to fixture stock vertically
Adjustable Shelf: Raise and lower parts for horizontal cutting
Mounts to your bench & stores easily: Clamp Workstation to your bench or permanently mount. Flat pack when not in use
How it all works
Workstation combines with Origin to create a precision cutting system that makes even the most demanding projects approachable and intuitive.
How it all works
Workstation combines with Origin to create a precision cutting system that makes even the most demanding projects approachable and intuitive.
Highly Versatile Fixturing
Vertical workholding perfected
Make even the most demanding projects approachable and intuitive.
ShaperTape pre-applied
Workstation has durable ShaperTape pre-applied. Origin will remember all Origin Workspaces you create with your Workstation.
Cut & Repeat
Quick setup features make repetitive cuts for volume production fast and reliable.
CLAMP AND CUT ANY SETUP
The vertical and horizontal workholding capabilities of Workstation enable you to cut a wide range of joinery.
CLAMP AND CUT ANY SETUP
The vertical and horizontal workholding capabilities of Workstation enable you to cut a wide range of joinery.
Perfect Box Joints
Combine Origin’s Box Joint Basic Extension with Workstation to cut precise box joints with ease.
Accurate Mortise & Tenons
Cut tenons at any angle from 0° to 45° with confidence.
Delicate Pieces
Perform detailed cuts on small or difficult-to-fixture workpieces with the included Shelf.
Fixture Odd Pieces
Make your own custom fixturing mounts to hold unusually shaped workpieces.
Test Fit
Return to a cut with Origin so you can sneak up on the perfect fit.
Horizontal Cutting
Shelf makes it easy to register your workpiece so it’s flush with the top of Workstation.
Get Started
Find the system that's right for you
Workstation Specs
A carefully designed and essential accessory to the Origin ecosystem.
250mm
Max. Height
465mm
Depth
515mm
Width
9.75Kgs
Assembled Weight
Workstation Parts
Workstation comes with all the components you need to take advantage of reliable, repeatable and versatile fixturing right out of the box.
Workstation Parts
Workstation comes with all the components you need to take advantage of reliable, repeatable and versatile fixturing right out of the box.
Body
The core of Workstation with durable ShaperTape pre-applied and multiple ways to secure to your bench.
Support bar
An adjustable support for the front of the edge of Origin, designed to keep your cuts flat and precise.
Shelf
A height adjustable surface for fixturing small or difficult-to-hold work pieces of almost any thickness.
4 mm Wrench
T-Handle Hex Wrench for every commonly used screw on the Workstation.
Clamping face
A versatile clamping platform that is factory calibrated to guarantee precision alignment every time.
Support arms
Easy to install arms that hold the Support Bar in line with the body.
Angled fence
An adjustable angle guide with a built-in scale makes it easy to set up and cut angled tenons between 0° and 45°.
Hold down clamps
Included T-Track Clamps for versatile and secure fixturing.
Spoilboards
Sacrificial MDF used to minimize tear out when cutting.
Related Products
Shaper Origin comes with everything you need to get cutting right out of the box.
€3,796.10
This is the tape we use here at Shaper HQ. Strong bonding, and residue-free when you remove it!
€33.32
The Shaper Woven Dust Hose is light, flexible, and durable, and works with a wide variety of dust collection systems.
€117.81
Send measurements to Origin or other Bluetooth® devices at the click of a button.