VIDEO TUTORIALS
Du hast gerade deine Shaper Origin bekommen und möchtest die Grundlagen kennenlernen oder brauchst einfach Hilfestellung? Wir haben alles für dich, vom ersten Auspacken bis zur Design-Software.
ERSTE SCHRITTE MIT ORIGIN
Beginne hier, wenn du Origin gerade gekauft hast oder sie zum ersten Mal benutzt. Diese Videoreihe leitet dich vom Auspacken bis zum ersten Fräsen.
6 Min |Lesson 1: Unboxing
Your Shaper Origin has arrived! Watch this video to get a quick overview of what you will find inside your Systainer.
2 Min |Lesson 2: Tool Setup and Account creation
First things first: Create your account and log into your Origin
4 Min |Lesson 3: Creating a Workspace
Every project starts with a Workspace. Let’s create your first one.
4 Min |Lesson 4: The Design Menu
Origin is packed with powerful design tools, directly onboard.
Gestalten für Origin
Vom On-Tool-Design zum Shaper Studio und mehr
20 Min |Grid
Create a grid whenever you start a new Workspace
6 Min |Workspaces
Workspaces are a fundamental building block of any project.
1 Min |Perfect Box Joints with Origin
Box Joint Basic is a free extension on Origin to create box joints
2 Min |Pocketing Procedure
In this video, Sam explains pocketing with Origin.
Tipps und Tricks
Tauch noch tiefer ein und erfahre spannende Tricks und hilfreiche Tipps zum Arbeiten mit dem Shaper System
28 Min |On Tool Design: Box Joints
Box Joint Basic lets users input their joint parameters and creates cut files on the fly—no computers or physical templates required!
50 Min |On Tool Design: Text
In this Shaper Session we are going through all things text for Origin.
2 Min |On Tool Design: Shapes - Dogbone
In this video, Sam demonstrates the how to create dogbones on tool.
25 Min |Shaper Studio: Getting Started
In this video we will cover the basics of how to use Shaper Studio
Plate & Workstation
Lerne alles über Plate und Workstation
2 Min |Shaper Plate: Introduction
Shaper Plate is the universal template for Origin, designed to install a wide range of hardware, route System 32 holes and much more.
19 Min |Shaper Plate: Setting up Plate
Thanks to Origin’s saved Workspaces, you only need to Scan and Grid once when cutting with Plate.
9 Min |Shaper Workstation: Overview
Full walkthrough of Workstation's components
18 Min |Shaper Workstation: Tutorial
Learn how Workstation can expand your shop's capabilities
Shaper Zubehör
Das Shaper-Zubehör wurde speziell für Origin entwickelt, um dir ein optimales Fräserlebnis zu bieten.
1 Min |Applying the Shaper Origin Screen Cover
We'll show you how to install the protective screen cover on your Origin.
27 Min |Connected Caliper Walkthrough
Learn how to use the Connected Caliper with Origin
27 Min |Tips & Tricks for Cutting Foam Inserts
Best practices for cutting custom foam inserts for your limited edition Shaper Customizable Systainer.
70 Min |Specialty Bits
How to use our Specialty Bits
