⅛” X ½” Up-Spiral O-flute Router Bit
Ideal for non-ferrous metals and acrylic
Polished O-flute resists chip adhesion
Appropriate for a wide range of non-wood materials
Requires a ¼” (inch) collet
Product ships within 3-7 business days
Shipping cost and VAT, if applicable, are calculated in the checkout. Delivery time and cost vary base on your location.
Product Overview
An ideal bit for many types of acrylic cutting. The polished flute prevents nasty chip build-up that can compromise cut quality and decrease cutter longevity. Appropriate cutter geometry for both acrylics and non-ferrous metals. Great for cuts up to 1/2” in depth.
Overall Length: 2.5”
Shank Diameter: 0.25”
Cutter Diameter: 0.125”
Cutter Length: 0.5”
Frequently Asked Questions
Yes, this bit will fit the ¼” collet that is supplied with Origin.
This depends on the material you are cutting. You can find more information on recommended settings for Origin based on material types in this article: material recommendations.
The up-spiral design pulls material up and out of your cuts. This can leave a little fuzz on the top edge of your material but this is easily removed with a quick rough-up with fine grit sandpaper. Adjacent spoilboards are always recommended when making cuts beyond the edge of your material to reduce tear-out.
Resin, sap, and adhesives will build up on your cutter edge over time. This generates more friction on your bit and accelerates edge degradation. Keep your bits clean with a small brass brush, citrus cleaner and a rag.