8mm 60° Engraving Router Bit
Ideal for engraving a wide variety of materials
60° cutting angle for shallow v-cuts
8 mm shank fits Origin’s stock collet
Product ships within 3-7 business days
Shipping cost and VAT, if applicable, are calculated in the checkout. Delivery time and cost vary base on your location.
Product Overview
The engraving router bit has a 60° cutting angle for shallow v-cuts. It's perfect for engraving a variety of materials including any wood type, plastic, and selected non-ferrous metals. The 8 mm shank diameter is compatible with the 8 mm collet supplied with Origin. Solid carbide composition keeps your edge sharp even after hours of use.
Overall Length: 54.5 mm
Shank Diameter: 8 mm
Cutting Angle: 60°
Cutter Length: 7.1 mm
Geometry: V-Bit, Engraving
Material: Solid Carbide
Frequently Asked Questions
Yes, this cutter fits the ¼" collet from our Collet Kit available in the store.
Engraving bits are designed to cut at very shallow depths (~0.5 mm). Although you can make multiple passes with a V-cut bit, bear in mind that your cut will widen as you cut deeper due to the cutter’s geometry.
This depends on the material you are cutting. We always recommend that you cut with Auto Mode when engraving. You can find more information on recommended settings for Origin based on material types in this article: material recommendations.
The engraving bit will leave a very smooth surface finish which will be free of tear-out.
Resin, sap, and adhesives will build up on your cutter edge over time. This generates more friction on your cutter and accelerates edge degradation. Keep your cutters clean with a small brass brush, citrus cleaner and a rag.