¼” X 1” Up-Spiral Flat Router Bit

€31.32

Incl. tax, plus shipping
€27.00
Excl. tax, plus shipping
  • Longer cutter length than our stock 6mm bit

  • Increased reach and bit stability in deeper cuts

  • Upcut geometry provides excellent chip extraction

  • Requires a ¼” (inch) collet

Product ships within 3-7 business days

Shipping cost and VAT, if applicable, are calculated in the checkout. Delivery time and cost vary base on your location.

SKUs: SE1-2500-1000C

Product Overview


The ¼” x 1” Up-Spiral Bit has the same qualities as our stock ¼” cutter—including carbide composition, dual flute geometry, and compatibility with Origin’s ¼” collet—with the added benefit of a longer overall length and a longer cutting length for deeper passes and improved stability in deep cuts.

Overall Length: 2.5"

Shank Diameter: 0.25"

Cutter Diameter: 0.25"

Cutter Length: 1"

Frequently Asked Questions

Yes, this bit will fit the ¼” collet that ships with Origin.

As a general rule of thumb for cutting wood, it’s best to never cut deeper than the diameter of the bit in a single pass. So for a ¼” bit, you should not cut deeper than ¼” in a single pass. Because every material is different, it’s best to perform test cuts to find the ideal pass depth and cut specs when working with a new material.

Resin, sap, and adhesives will build up on your cutter edge over time. This generates more friction on your cutter and accelerates edge degradation. Keep your cutters clean with a small brass brush, citrus cleaner and a rag.

The ¼” x 1” Up-Spiral Router Bit can cut to a maximum depth of 1”.