⅛” X ½” Up-Spiral Flat Router Bit
€27.00
Great for intricate cuts and finer details
Ideal for a wide variety of materials and projects
Solid carbide composition stays sharp longer
Product ships within 3-7 business days
Shipping cost and VAT, if applicable, are calculated in the checkout. Delivery time and cost vary base on your location.
Product Overview
The ⅛” Up-Spiral bit is a perfect complement to our ¼” cutter. Its narrower diameter gives you the freedom to cut finer details, while its solid carbide composition keeps this cutter sharp after hours of use. With its ¼” shank, this cutter also fits in Origin’s stock collet.
Overall Length: 2”
Shank Diameter: 0.25”
Cutter Diameter: 0.125”
Cutter Length: 0.5”
Frequently Asked Questions
Yes, this bit will fit the ¼” collet that is supplied with Origin.
As a general rule of thumb for cutting wood, it’s best to never cut deeper than the diameter of the bit. So for a ⅛” bit, you should not cut deeper than ⅛” in a single pass. Because every material is different, it’s best to perform test cuts to find the ideal pass depth and cut specs when working with a new material.
This depends on the material you are cutting. You can find more information on recommended settings for Origin based on material types in this article: material recommendations.
The up-spiral design pulls material up and out of your cuts. This can leave a little fuzz on the top edge of your material but this is easily removed with a quick rough-up with fine grit sandpaper. Adjacent spoilboards are always recommended when making cuts beyond the edge of your material.
The ⅛” up-spiral router bit can cut to a maximum depth of ½".
Resin, sap, and adhesives will build up on your cutter edge over time. This generates more friction on your cutter and accelerates edge degradation. Keep your cutters clean with a small brass brush, citrus cleaner and a rag.