Useful for decorative edging and juice grooves on signage, cutting boards, and more

Clean and reliable option to use to create finger pulls and in your work in a single pass.

Special Dovetail Router Bit designed to route slots for the Keilverbinder connection system

Features a 30 mm cutting length plus a clamping neck to use Origin’s full Z-axis travel

15 mm cutting length provides extra reach with a small diameter bit

High performance roughing bit for removing large amounts of material while still cutting deep passes

With a ¼” shank and 60° geometry, use this cutter for engraving operations and shallow v-cuts

Perfect for cutting finer, shallower details.

Origin’s workhorse cutter, ideal for a wide variety of projects and materials

The ⅛” polished O-flute bit is a great go-to bit for making shallow cuts in a wide variety of acrylics and non-ferrous metals. The polished flute prevents nasty chip build-up that can compromise cut quality and decrease cutter longevity, and the shorter profile contributes to overall durability. Great for cuts up to ¼” in depth.

Perfect for deep profile contouring or cutting wedged tenons for custom joinery.

Ideal for cutting board juice channels to dimensional signage and text.

This T-slot bit adeptly handles a wide range of undercut operations. From insetting cables to cutting perimeter T-slots and keyhole mounting, this brazed carbide bit stays sharp and durable, reducing runout and ensuring quality cuts throughout its lifetime.

This 15° dovetail bit can be your go-to bit for all your dovetail joinery. Dual-edged brazed carbide blades cut consistently and accurately in even the hardest woods. Its 15° incline is designed for European designs (the American dovetail is typically 14°), giving you greater freedom to take on a wider variety of projects.

Take advantage of more of Origin’s Z-axis travel range with this 35 mm cutter length. Three flutes provide cutting advantages in a wide range of materials, from foam to hardwood. Increased pass depth will make your Origin projects more efficient without compromising on cut quality or stability. The shaft is marked for exact collet clamping to save time during bit changes. 

Make single passes up to ¾” in even dense hardwood with confidence! 8mm collet required.

This clearing bit will change the way you work with Origin. Its 16 mm diameter will make quick, clean work of all your pocketing operations, and make Origin a much more efficient tool for a wide range of projects. The three-flute geometry reduces load on the spindle, decreases heat build-up, and keeps your cutter edges sharp and clean through hours of cutting.

Longer cutting length for deeper passes and improved stability in deep cuts.

Gives you the freedom to make deep cuts in acrylics with accuracy and durability.

An ideal bit for many types of acrylic cutting. The polished flute prevents nasty chip build-up that can compromise cut quality and decrease cutter longevity. Appropriate cutter geometry for both acrylics and non-ferrous metals. Great for cuts up to 1/2” in depth.

The 90° Engraving Bit adds versatility to your engraving projects when combined with the stock 60° engraving bit that ships with Origin. In addition to engraving in a wide variety of materials including hardwoods, acrylics, and non-ferrous metals, you can use the V90 bit to chamfer edges for perfect 90° miters